Composite Commands These commands have sub commands within them that require different
rights to execute. For example the SO command has User Parameters, MP-wide parameters
within it. Each sub command needs rights as follows:
• MP:CM> so
— MP wide parameters [U]
— User parameters [M]
— IPMI password [M]
— OS initiated firmware update permissions [M]
— Regenerate the SSH server public key [M]
Special Commands These commands include operations that affect the cell, cabinet, or complex,
and only users having ‘All’ rights for ‘All’ supported partitions are allowed to execute these
commands.
MP-wide Commands MP-wide commands require a specific command right for all partitions
that a user has access to.
The iLO 2 commands are grouped in the above-mentioned categories, as shown in Table 7-1.
Table 7-1 Command Categories
Special CommandsComposite Commands
Partition-Specific
CommandsMP-Wide Commands
pexdbocccp
resorrdatede
ru (KMIX only)clrsdcdf
vm (sx2000 only)sltcdidu
cofwhe
clidif
ltls
lcma
ldapps
parpermte
rlwho
sax
sysrevhe
dnspwrgrd
locpd
snmpvfp
ups
fw
io
Access Rights
An iLO 2 user can have any, or all, of the following access rights:
LDAP and MP Login for Integrity Cell-Based Servers 79
To Next Page
Loading...
Need help?
General