Table 8-21 Power Regulator Page Description (continued)
DescriptionFields and Buttons
Submits the selected function.Submit
Cancels the action.Cancel
The power regulation functionality is achieved through two different interfaces:
• Power Regulation through HP SIM (using the HP IPM plug in)
HP Insight Power Manager (HP IPM), a plug-in to HP Systems Insight Manager (HP SIM),
is an integrated power monitoring and management application that provides centralized
control of server power consumption and thermal output. It extends the unified infrastructure
management framework of HP SIM by providing new energy levers into the server.
Leveraging HP power regulator technology, HP IPM makes policy-based power and thermal
management possible. It expands the capacity of data centers by reducing the amount of
power and cooling required for supported Integrity servers and the server blades.
An Advanced Pack license is required to use the power regulation feature through the IPM.
Information on HP IPM is available on the HP website at http://www.hp.com/go/ipm.
• Power Regulation through the iLO 2
The iLO 2 reads ACPI registers to gather information and display the current power efficiency
mode of the system. The available power regulator mode settings are sent to the OS through
an ACPI interface. If the OS is able to respond to the settings, it sets return codes to note
success or failure to reach these settings.
You do not need an Advanced Pack license to use the power regulation feature through iLO
2.
Administration
The Administration tab enables you to access the following pages:
• Firmware Upgrade
• Licensing
• Local Accounts
• Group Accounts
• Settings
• Access Settings: LAN, Serial, and Login Options
• Directory Settings: LDAP Parameters
• Network Settings: Standard and Domain Name Server
• BL c-Class (Available only for server blade.)
• SNMP Settings
• Help
Firmware Upgrade
The Firmware Upgrade page functionality is only available to authorized HP service personnel.
The MP firmware is packaged along with system, BMC, and FPGA/PSOC firmware. To perform
a firmware upgrade, you can download and upgrade the firmware package from the HP website
at http://www.hp.com/go/bizsupport.
Web GUI 137
To Next Page
Loading...
