The iLO 2 vMedia CD/DVD appears to your operating system just like any other CD/DVD. When
using the iLO 2 for the first time, the host operating system might prompt you to complete a
New Hardware Found wizard.
NOTE: This feature requires that the Java Plug-in 1.4.2 or 1.5 is installed.
This feature requires the vMedia right and the Advance Pack License. For more information, see
“Obtaining and Activating iLO 2 Advanced Pack Licensing” (page 27). If a user does not have
the vMedia right, it can be granted from the User Administration page under the Administration
tab by a user with Admin privileges.
To use a physical CD/DVD drive in your client system, follow these steps:
1. Select Virtual Media. The Virtual Media content page appears.
2. Click Launch to load the applet and connect to USB CD/DVD devices and disk image files
available on the client as virtual devices on the server. The vMedia applet appears
(Figure 8-13).
NOTE: Only one user and one device can be connected at a time.
Figure 8-13 Virtual Media Dialog Box (Before Connection)
3. Select Local Media Drive.
4. Select the drive letter of the desired physical CD/DVD drive on your client system from the
list.
Web GUI 127
To Next Page
Loading...
