Firmware Revision Display and Upgrade
This section describes how to view firmware revisions in the system.
Each installed firmware in the system known to MP (MP FW, BMC FW, EFI FW, System FW,
and so on) is represented by a swid target.
• /map1/swinstallsvc1 represents iLO 2’s ability to install firmware.
• /map1/swinventory1 represents a collection of all swids installed in the system.
SM CLP Firmware Targets
This section describes targets, target properties, and supported verbs necessary to implement
the firmware model in SM CLP.
Target: map1/swinstallsvc1
SoftwareInstallationService provides the ability to transfer images into a managed element from
a source location, local or remote (such as the ability to upgrade firmware).
Table 8-40 shows swinstallsvc1 target properties.
Table 8-40 swinstallsvc1 Properties
Access and ValuesDescriptionProperty Name
Read-only
The value is set to firmware
installation service.
Provides a textual description of the object.Description
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
Target: map1/swinventory1
SoftwareInventory is a dedicated collection for all firmware in the system known to iLO 2.
Table 8-41 shows swinventory1 target properties.
Table 8-41 swinventory1 Properties
Access and ValuesDescriptionProperty Name
Read-only
The value is set to firmware inventory.
Provides a textual description of the object.Description
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
Target: map1/swinventory1/swid#
SoftwareIdentity represents software in the system known to iLO 2 (map1).
Table 8-42 shows swid# target properties.
SMASH Server Management Command Line Protocol 163
To Next Page
Loading...
Need help?
General