Table 4-1 TCP Ports
Port FunctionalityPort TypePort Identifier
This is the default port used by clients connecting to iLO 2 using SSH
protocol.
SSH portPort 22
This is the default port used by clients connecting to iLO 2 using
Telnet protocol.
Telnet portPort 23
This is the default port used by clients connecting to iLO 2 using the
web interface or a web browser. This port is not secure. This port
provides basic iLO 2 identification information when queried. Any
web connection made on port 80 is redirected to the login on the https
port for a secure web session.
http portPort 80
This is the port used by clients connecting to iLO 2 using the web
interface or a web browser securely. This is a secure port.
https portPort 443
Clients connect to this port by default when using the Remote Serial
Console connection.
remote serial console
port
Port 2023
Clients connect to this port when using the Integrated Remote Console
connection.
vKVM portPort 4644
Clients connect to this port when using the Virtual Media applet
connection.
vMedia portPort 17988
Table 4-2 UDP Ports
Port FunctionalityPort Number
This port is used by clients to query SNMP information from iLO 2.Port 161
This port is used by clients to issue IPMI commands to iLO 2.Port 623
56 Logging In to iLO 2
To Next Page
Loading...
Need help?
General