NOTE: The BL c-Class tab is available only on HP Integrity server blades.
Table 8-30 lists the fields, buttons, and descriptions.
Table 8-30 DNS Page Description
DescriptionFields and Buttons
Use the DHCP server-supplied domain name.Use DHCP supplied
domain name
This represents the factory-default DNS name of the subsystem, for example, “hp.com”
in “ilo.hp.com”. You can enter a new DNS name.
Domain name
Use the DHCP server-supplied DNS server list.Use DHCP supplied DNS
servers
Register its name with a DDNS server.Register with Dynamic DNS
Submits the DNS information.Submit
Cancels the action.Cancel
SNMP Settings
The SNMP Settings page (Figure 8-30) enables you edit SNMP feature settings.
You must have iLO configuration access right to use this feature.
NOTE: Depending on your server, this page might look slightly different.
Figure 8-30 SNMP Settings Page
NOTE: The BL c-Class tab is available only on HP Integrity server blades.
Table 8-31 lists the fields and descriptions.
148 Using iLO 2
To Next Page
Loading...
