Table 7-2 Access Rights for Cell-Based Servers
Description
Single Letter
RepresentationAccess Right
This right is required to perform any operation on iLO 2.
A user must have this right for each partition to which access is
granted.
With this right, a user can run Status or Read-only commands.
LLogin Access
This right enables a user to access the console of the specified
partition (such as the host OS).
Console Access Level CO Command.
CConsole Access
This right enables a user to power on and off or reset the host
platform.
PServer Power Access
This right enables a user to configure iLO 2 parameters.
Some examples of commands that are used to configure MP
parameters are CA, CC, CG, DATE, DC, DI, ID, IT,
LC, LDAP, MFG, PARPERM, and RL.
MMP Configuration Access
This right enables a user to create, modify, and delete local iLO
2 user accounts and set the default partition for a session.
Examples of an MP Local User Administration Level Command
are SO and PD.
UUser Administration
Access
This right enables a user to control and access vMedia for the
selected partition.
VVirtual Media Access
Table 7-3 lists the iLO 2 commands and the access right associated with each command.
Table 7-3 Commands and Associated Access Right
Access RightLocationCommand
Server Power AccessCommand MenuBO
Server Power AccessRR
Server Power AccessRS
Server Power AccessTC
MP Configuration AccessCC
Login AccessCP
MP Configuration AccessDATE
MP Configuration AccessDC
Login AccessDE
Login AccessDF
MP Configuration AccessDI
Login AccessDU
Login AccessHE
MP Configuration AccessID
Login AccessIF
MP Configuration AccessIT
MP Configuration AccessLC
80 Configuring DHCP, DNS, LDAP, and Schema-Free LDAP
To Next Page
Loading...
Need help?
General