</>hpiLO-> start system1
status=0
status_tag=COMMAND COMPLETED
system1 has been powered on
Map1 (iLO 2) Target
Target: map1
The map1 target (management access point) represents the root of the iLO 2 namespace. Functions
and information related to iLO 2 are located under the map1 target.
Table 8-37 shows map1 target properties.
Table 8-37 map1 Properties
Access and ValuesDescriptionProperty Name
Read-only
Set to management.
Indicates whether the computer
system is a special purpose system
(for example, dedicated to a
particular use), or a
general-purpose system.
Dedicated
Read-only
Set to iLO 2 Advanced, HP Integrity.
Name that identifies iLO 2.Name
Verbs
show Displays information.
help Displays context-sensitive help.
reset Resets iLO 2.
Map1 Example
The following example displays information about map1:
</> hpiLO-> show map1
status=0
status_tag=COMMAND COMPLETED
/map1
Targets
dhcpendpt1
dnsendpt1
dnsserver1
dnsserver2
dnsserver3
enetport1
gateway1
group1
settings1
sshsvc1
swinstallsvc1
swinventory1
telnetsvc1
textredirectsap1
textredirectsvc1
Properties
Name=iLO Advanced, HP Integrity
Dedicated=Management
Verbs
cd help show load reset
</> hpiLO->
160 Using iLO 2
To Next Page
Loading...
