Table 8-25 LAN Page Description (continued)
DescriptionFields and Buttons
Submits the information.Submit
Cancels the action.Cancel
Serial Page
The Serial page (Figure 8-25) enables you to set the serial port parameters. You must have iLO
configuration access right to use this feature.
NOTE: Depending on your server, this page might look slightly different.
Figure 8-25 Serial Page
NOTE: The BL c-Class tab is available only on HP Integrity server blades.
Table 8-26 lists the fields, buttons, and descriptions.
Table 8-26 Serial Page Description
DescriptionFields and Buttons
This option enables you to set the baud rate. Input and output data rates are the same.Bit Rate in Bits per Second
Flow control can be through hardware or software. Hardware uses RTS/CTS; software
uses Xon or Xoff.
Flow Control
Submits the information.Submit
Cancels the action.Cancel
Login Options Page
The Login Options page (Figure 8-26) enables you to modify the security options of iLO 2. You
must have iLO configuration access right to use this feature.
Web GUI 143
To Next Page
Loading...
Need help?
General