HP Integrity BL870c - User Accounts Configuration; Target: Map1;Group1; Target: Map1;Group1;Account; Group1 Properties

• The vMedia feature is supported using the USB 1.1 protocol (since MP FW uses Philips 1181
USB device). As a result, USB 2.0 is not currently supported.
• DVD appears as the large CD.
• Currently there is no support on fully compliant DVD.
Typical Scriptable vMedia Usage
Using the scriptable vMedia feature, you can perform the following:
Deploying Operating Systems
• Installing (RHEL and SLES) Linux using ISO images
• Installing (RHEL and SLES) Linux using a set of physical CDs
• Installing Windows Server 2003 using Re-install Media using CD
• Installing Windows Server 2003 using Re-install Media using ISO image
• Installing Windows Server 2003 using Smart-setup and RTM-bit physical CDs
• Installing Windows Server 2003 using Smart-setup and RTM-bit ISO images
• Installing HP-UX using a physical CD
• Installing HP-UX using ISO images
Installing an Application Installing MS SQL Server from an MSDN DVD
User Accounts Configuration
This section describes targets, their properties, and supported verbs used for configuring and
viewing iLO 2 user accounts using SM CLP.
Target: map1/group1
The group1 target represents a collection of user accounts on iLO 2.
Table 8-54 shows group1 target information.
Table 8-54 group1 Properties
Access and ValuesDescriptionProperty Name
Read-only
Set to collection of user accounts.
Textual description of this collection
target.
Description
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
Target: map1/group1/account#
The account# target represents a user account on this iLO 2 where # is the instance number of
the specific account. You can configure up to 19 user accounts on the iLO 2.
Table 8-55 shows account# target properties.
Table 8-55 account# Properties
Access and ValuesDescriptionProperty Name
Read/write.
Specified in ASCII characters up to 24 characters long.
Login name of this user
account.
UserID
Read/write.
Specified in ASCII characters and must be least six characters long.
User password.UserPassword
176 Using iLO 2