2. Run ilosetup.efi from EFI.
fs0:\EFI\TOOLS> ilosetup get
Current LAN parameters:
IP Address : 127.0.0.1
Subnet : 255.255.255.0
Gateway : 127.0.0.1
fs0:\EFI\TOOLS>
fs0:\EFI\TOOLS> ilosetup set -l -i 15.255.96.44 -g 15.255.96.1 -s 255.255.248.0
Attemping to set iLO LAN parameters...
LAN parameters have been set.
The iLO2 resets after you have successfully configured the LAN parameters.
Additional Setup 53
To Next Page
Loading...
