HP Integrity BL870c User Manual

Table 8-9 Command Menu Commands (continued)
DescriptionCommand
Disconnects the LAN console
DI
Sets the DNS configuration
DNS
This command is only available to authorized HP service personnel
FW
Displays help for the menu or command
HE
Displays or modifies system information
ID
Modifies the iLO 2 inactivity timeouts
IT
Displays the LAN configuration
LC
Displays the LDAP configuration
LDAP
License management
LM
Displays and configures locator LED
LOC
Displays the LAN status
LS
Remote power control
PC
Remote power mode control
PM
Configures the power restore policy
PR
Displays the power management module status
PS
Resets the BMC
RB
Resets the system through the RST signal
RS
Sets access options
SA
Configures SNMP parameters
SNMP
Configures security options
SO
Displays system processor status
SS
Displays all firmware revisions
SYSREV
Resets through transfer of control (TOC)
TC
“Tell” (sends a message to other users)
TE
Displays a user configuration
UC
Displays connected iLO 2 users
WHO
Diagnoses or resets iLO 2
XD
The following is a quick reference list that provides MP Command mode activities:
To access the Command menu, enter CM at the MP Main Menu.
To see all the available commands, enter HE LI at the MP:CM> prompt.
To access the Command menu help, enter HE at the MP:CM> prompt. The Command menu help
provides information on all the Command menu items.
To modify the inactivity timeout, enter the IT command. The inactivity timer aborts a command
if you do not complete it within a certain time period and redirects you back to the command
prompt.
To abort most commands, enter Q at the point when the iLO 2 MP is asking for input.
To return to the MP Main Menu from any of these commands, press Ctrl-B.
90 Using iLO 2

HP Integrity BL870c Specifications

General

Brand	HP
Model	Integrity BL870c
Category	Server
Language	English