HP MSR Router Series User Manual

104
Ste
p
Command Remarks
7. (Optional.) Specify a backup
traffic processing card for the
HDLC link bundle interface.
(Distributed devices in
standalone mode.)
service standby slot slot-number
By default, no backup traffic
processing card for the HDLC link
bundle interface is specified.
8. (Optional.) Specify a backup
traffic processing device for
the HDLC link bundle
interface. (Centralized
devices in IRF mode.)
service standby slot slot-number
By default, no backup traffic
processing device for the HDLC link
bundle interface is specified.
9. (Optional.) Specify a backup
traffic processing card for the
HDLC link bundle interface.
(Distributed devices in IRF
mode.)
service standby chassis
chassis-number slot slot-number
By default, no backup traffic
processing card for the HDLC link
bundle interface is specified.
10. (Optional.) Set the minimum
number of Selected interfaces
required for bringing up the
HDLC link bundle.
bundle min-active links number
By default, the minimum number of
Selected interfaces required for
bringing up an HDLC link bundle is
not set.
11. (Optional.) Set the maximum
number of Selected interfaces
allowed in the HDLC link
bundle.
bundle max-active links number
The default setting is the maximum
number of Selected interfaces
supported.
12. (Optional.) Set the minimum
bandwidth required for
bringing up the HDLC link
bundle.
bundle min-active bandwidth
bandwidth
By default, the minimum bandwidth
required for bringing up an HDLC
link bundle is not set.
13. (Optional.) Set the expected
bandwidth for the HDLC link
bundle interface.
bandwidth bandwidth-value
By default, the expected
bandwidth (in kbps) is the interface
baud rate divided by 1000.
14. (Optional.) Set a description
for the HDLC link bundle
interface.
description text
By default, the description of an
HDLC link bundle interface is the
interface name followed by the
Interface string.
15. (Optional.) Set the MTU size
for the HDLC link bundle
interface.
mtu size
The default setti
ng is 1500 bytes.
The MTU size affects the
fragmentation and reassembly of IP
packets. Use this command to set a
proper MTU size according to your
network conditions.
16. (Optional.) Restore the default
settings for the HDLC link
bundle interface.
default N/A

HP MSR Router Series Specifications

General

Brand	HP
Model	MSR Router Series
Category	Network Router
Language	English