HP ProCurve 5400zl

■ interface vlan VLAN-ID ip
Usage: [no] ip ...
Description: Congure various IP parameters for the VLAN. The 'ip'
command must be followed by a feature-specic keyword.
Use 'ip ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
■ access-group -- Apply the specified access control list on this VLAN interface (ASCII-STR) (p.
214)
■ address -- Set IP parameters for communication within an IP network(p. 216)
■ proxy-arp -- Enable/disable proxy ARP(p. 268)
■ local-proxy-arp -- Enable/disable local proxy ARP(p. 248)
■ bootp-gateway -- Add or remove the gateway address to be used for stamping incoming DHCP
requests(p. 228)
■ helper-address -- Add or remove a DHCP server IP address for the VLAN (IP-ADDR) (p. 237)
■ forward-protocol -- Add or remove a UDP server address for the VLAN(p. 235)
■ igmp -- Enable/disable/configure IP Multicast Group Protocol (IGMP) feature on a VLAN(p. 238)
■ irdp -- Configure ICMP Router Discovery Protocol (IRDP)(p. 246)
■ ospf -- Enable/disable/configure Open Shortest Path First (OSPF) protocol on the VLAN
interface(p. 256)
■ rip -- Enable/disable/configure Routing Internet Protocol (RIP) on the VLAN interface(p. 274)
■ pim-dense -- Enable/disable/configure PIM-DM protocol on the VLAN interface(p. 259)
■ pim-sparse -- Enable/disable/configure PIM-SM protocol on the VLAN interface(p. 259)
■ mroute -- Configure IP Multicast Routing parameters on the VLAN interface(p. 254)
■ interface svlan VLAN-ID ip
Usage: [no] ip ...
Description: Congure various IP parameters for the VLAN. The 'ip'
command must be followed by a feature-specic keyword.
Use 'ip ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
■ access-group -- Apply the specified access control list on this VLAN interface (ASCII-STR) (p.
214)
■ address -- Set IP parameters for communication within an IP network(p. 216)
ip-addr
■ [no] interface loopback < 0 to 7 > ip address IP-ADDR
Interface IP address.
■ [no] interface loopback < 0 to 7 > ip ospf IP-ADDR
241© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide