IBM V7000 User Manual

Chapter 11. SAN connections and configuration 499
Figure 11-41 shows the first panel when logged in initially. The bay ports and adapters are
displayed with ports that have logged into the switch. IBM Flex System V7000 Storage Node
occupies node bays 1-4. The positions can be verified with the CMM chassis display.
Figure 11-41 Initial FC3171 8Gb SAN Switch configuration
Figure 11-41 has the following settings indicated:
򐂰 External port connection from external storage controller (IBM DS4000)
򐂰 x240 compute node FC adapter in Bay 11 adapter slot 2
򐂰 IBM Flex System V7000 Storage Node Network adapter 2 from each canister
򐂰 Compute node bays listed with WWN ids in first row
򐂰 Indicates view is shown from the ‘Devices’ tab
This switch has not been used before, so in this example, we are doing these tasks:
1. Creating a zoneset
2. Creating aliases
3. Creating a zone
4. Adding aliases to a zone
5. Adding a zone to zoneset
6. Activating the zoneset

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities