528 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
9. Open the Windows Disk Management window (Figure 12-24) by clicking Start Run,
typing diskmgmt.msc, or simply opening it from the Server Manager, then click OK.
Figure 12-24 Windows Disk Management
10.Set the disk online, initialize it, create a file system on it, and then it is ready to use. The
detailed steps of this process are similar to those described in 12.3.1, “Windows 2012 R2
Fibre Channel volume attachment” on page 514.
Now the disk is ready for use (Figure 12-25). In our example, we have mapped a 11 TB disk,
which is thin-provisioned on IBM Flex System V7000 Storage Node, to a Windows 2008
Server host using iSCSI.
Figure 12-25 Windows Disk Management: Disk is ready to use
To Next Page
Loading...
