IBM V7000 User Manual

634 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Uploading SSH public key to IBM Flex System V7000 Storage Node
After you have created your SSH key pair, you need to upload your SSH public key onto IBM
Flex System V7000 Storage Node. Complete the following steps:
1. Open the user section (Figure A-6).
Figure A-6 Open Users section
2. Right-click the user for which you want to upload the key and click Properties
(Figure A-7).
Figure A-7 Superuser properties

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities