IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual 4-37
3 Project Settings Dialog Box
4
Project Settings
Functions Available with the Serial Interface
The following functions can be used with MICRO/I models equipped with the serial interface.
•Online
 Refer to Chapter 24 “Online Function” on page 24-1.
•Debug
 Refer to Chapter 25 “Monitor Function” on page 25-1.
• Barcode reader connection
 Refer to Chapter 3 “5 User Communication” on page 3-8.
Functions Available with the Ethernet Interface
The following functions can be used with MICRO/I models equipped with the Ethernet interface.
•Online
 Refer to Chapter 24 “Online Function” on page 24-1.
•Debug
 Refer to Chapter 25 “Monitor Function” on page 25-1.
• Web Server
 Refer to Chapter 28 “1 Web Server Function” on page 28-1.
• BACnet Communication
*1
 Refer to Chapter 3 “7 BACnet Communication” on page 3-94.
Functions Available with the USB Interface
The following functions can be used with MICRO/I models equipped with a USB interface.
•Online
 Refer to Chapter 24 “Online Function” on page 24-1.
•Debug
 Refer to Chapter 25 “Monitor Function” on page 25-1.
• Printer connection
 Refer to Chapter 32 “Printer” on page 32-1.
• Barcode reader connection
 Refer to Chapter 3 “5 User Communication” on page 3-8.
The functions that can be used with the USB interface vary based on the MICRO/I model.
*1 HG5G/4G/3G/2G-V only
MICRO/I functions
HG5G/4G/3G/2G-V,
HG4G/3G, HG2G-5F
HG2G-5T, HG1G/1P
Online YES YES
Debug YES YES
Printer connection YES NO
Barcode reader connection YES YES

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English