IDTECK iTDC - Setup Menu F4

SETTING CHANGES
iTDC
p.109
NEW MODE
When time schedule is applied on the input, it only processes the input that occurs in
the time schedule section.
OLD MODE
When time schedule applied on the input, it only processes the input that occurs out
of the time schedule section.
If the application software, STARWATCH iTDC PRO I/II is used for time schedule
setting, the ‘OLD MODE’ is automatically applied in the operation. If the application
software, STARWATCH STANDARD, is used for time schedule setting, the ‘NEW
MODE’ automatically applied in the operation.
4 SETUP MENU F4
SETUP MENU F4On set-up menu F4, there are self-diagnosis functions to test the
performances of the operations. To test, press <ENT> key on the menu.