Image Access Bookeye 4 - Device Information Screen

Setup Manual Page 103
D.4.6.10.1 Setup
Picture 77: LDAP Directory parameters
Parameter Description
LDAP Server
Enter here the address of the LDAP server.
Port (389)
Enter the port to be used for the connection here. Standard
is port 389
Protocol Version
LDAP Version 2 / LDAP Version 3
Server Authentication
Yes / No
Bind
(with Server Authentication = Yes)
Enter the desired value here.
Password
(with Server Authentication = Yes)
Enter the password here.
BaseDN
Enter the desired value here.
Base
Click at the selection arrow and select from the list.
Search String
Enter the search string here.
Please note: Each change to an entry field is transferred to the scanner immediately.