Image Access Bookeye 4 Setup Manual

Page 138 Setup Manual
D.7.3 Change Password
It is recommended to modify the password often, to protect the limited access to the
Poweruser level.
Click on Change Password .
Picture 128: Change password menu
Select Level
Click on the selection arrow to open the list of log-in levels.
Select the log-in level, for which the
password should be
changed.
New Password
Enter the new password.
Retype New Password
Type the new password again.
Note: The system checks the syntax (upper and lower case) of the password.
Click on Clear Fields to clear the fields where the password can be entered.
Click on Apply to send the new password to the scanner.
The screen returns to the start screen of the Poweruser level.

Image Access Bookeye 4 Specifications

General

Brand	Image Access
Model	Bookeye 4
Category	Scanner
Language	English