Image Access Bookeye 4 Setup Manual

Setup Manual Page 41
C.6 Time and Date
Picture 18: Time and Date
To change the time or date value, touch the value in the respective line.
Touch the line at the desired position to move the “cursor”.
To delete a digit, place the cursor at the right side of the digit and press the “<=” button.
The digits will always be deleted from right to left.
Use the numeric keypad in order to enter digits.
Time zone
The time, displayed in the touchscreen, can be
adapted to the region where the scanner is used.
Touch the selection arrow and select the matching
time zone from the list.
The list closes after selecting.
Store time and date: Saves the modified values when pressed.
Reset time and date: Sets the values to default values when pressed.

Image Access Bookeye 4 Specifications

General

Brand	Image Access
Model	Bookeye 4
Category	Scanner
Language	English