Image Access Bookeye 4 - Picture 123: Network Analyzing Parameters

Page 134 Setup Manual
D.6.4.1.1 Perform Speed Test
Click on Perform Speed Test to check the date transfer speed.
Picture 123: Network Analyzing Parameters
Target Address
Enter an IP address which can be accessed from the scanner to test
the data transfer speed.
Packet Count
Click on the selection arrow to set the number of transferred packets.
Perform Now
Starts the test sequence.
Back To Net Test Menu
Returns to the network analyzer start screen.
Back To Test Suite
Returns to the Poweruser level start menu (Picture 121).