Image Access Bookeye 4 Setup Manual

Setup Manual Page 47
D.2.1.1 Navigating through the menus
The bottom line of each screen shows two buttons at the right side:
Setup Menu Returns to the login screen.
Launch Scan Application Switches to the main screen of the integrated Scan2Net
user interface
In each selection menu screen below the parameter to be set, the following button is
displayed:
Back to Main Menu Returns to the Poweruser level start menu (Picture 23).
The log file section (Adjustments & Support  Log Files) contains two more buttons:
Download Downloads the currently displayed log to a text file with
the extension “log”.
Back to Log File Menu Returns to the previous menu, where the desired log file
can be selected.
If data files can be selected and transferred within a menu, the menu contains the button
Send File Transfers the selected data file to the scanner, e.g. if a
firmware update is executed.
To install an option, a unique key code must be entered. The respective menu contains
the button
Apply Transfers the unique key code of the option to the
scanner.
Screens which show the result of measurements show the following buttons:
New Values Repeats the measurement and shows the result.
New with software 6.x or higher
Always click at this button when leaving the setup menu
to avoid unauthorized use of the setup features.

Image Access Bookeye 4 Specifications

General

Brand	Image Access
Model	Bookeye 4
Category	Scanner
Language	English