Page 44 Setup Manual
D.1 Setup Menu
The login level screen shows the buttons of the login level. All login levels except the level
User are password protected.
The button Launch Scan Application starts the Scan2Net scan application.
The button Back returns to the former screen.
Picture 21: Login level screen
D.1.1 Selecting the Login Level
User This level allows the user to get some status information from the scanner.
These are e.g. the firmware version, the remaining lamp operating time,
system information, and many more. Furthermore it allows setting a few
basic parameters.
Poweruser Password protected level. This level allows setting an extended range of
system parameters and to execute some adjustments. It includes all
parameters of the User level.
Admin Password protected level. This level allows setting all system parameters
and to configure the scanner in detail.
Access to the Admin level is limited for trained technicians. It includes all
parameters of the User level and the Poweruser level.
To Next Page
Loading...
Need help?
General
