Setup Manual Page 23
Lift the scanner from the wooden slide-in and place it on a sturdy table. The bearing
capacity of the table should be at least double of the scanner’s weight.
Picture 3: Scanner outside the transport box
Remove the plastic bags from camera head and scanner base unit.
Picture 4: Plastic bags removed from scanner
The TFT monitor is protected with a bubble wrap (3) between monitor and glass plate.
Remove it.
1. The reference folder with four CSTT-2 reference targets.
2. The operation manual.
The White Reference targets BE4-WA-V
1-A are below folder and manuals.
To Next Page
Loading...
Need help?
General
