Page 116 Setup Manual
D.5.6 Watermarks
This section allows selecting a watermark from the list and to edit the text of the
watermark.
Picture 92: Watermark list and text editor
As factory default, four types of the Scan2Net logo available.
The fifth type of watermark is a plain text. The text color and the text itself can be defined
below the list of installed images.
To select a watermark, click on the radio button in the column titled Select.
To delete a watermark from the list, click on the “Delete” symbol.
To set the text color and the text size, click at the selection arrow and select a value from
the list.
The line Edit text watermark allows defining a text for the watermark.
Click on Apply to transfer the text to the scanner.
To upload a new watermark image click on the Search button. The PNG file format is
required for the images.
Send File transfers the selected image to the scanner.
To Next Page
Loading...
Need help?
General
