Image Access Bookeye 4 Setup Manual

Setup Manual Page 65
D.4.2.5 SMB Settings
This section defines the parameters for the SMB Settings.
Picture 44: SMB Settings
Note: The default settings are recommended.
SMB Hostname
Enter an SMB host name to identify the scanner in the
network. Default is the MAC address of the scanner.
SMB Workgroup
Enter the SMB workgroup in which the scanner is
installed.
WINS Server
If a WINS server is used, enter the IP address of the
server or \\<Server name> here.
Use NTLMv2 Authentication
Select either Yes or No.
SMB Protocol Version
Select from the settings offered in the list. The
recommended operation systems for the protocol
version are named in brackets.
Trust server-provided hints
for kerberos tickets
No: Recommended
Yes: Can be used with older Windows server systems
Send principal to Windows
2008 Server (and later)
No: Recommended, higher security.
Yes: Low security, but higher compatibility.

Image Access Bookeye 4 Specifications

General

Brand	Image Access
Model	Bookeye 4
Category	Scanner
Language	English