Setup Manual Page 97
Parameter Description
Shows the status and available memory of the actual
mounted partition on the connected USB flash device.
Allows the user to choose a subdirectory on the connected
USB drive for storing the scans.
Shows the current setting of wildcard characters for the
automated naming scheme of each produced image file.
Configuration Test: Click on this link to test the settings. A separate window will open
and shows the test results.
Please note: Each change to an entry field is transferred to the scanner immediately.
D.4.6.7.2 List of suitable USB storage media
The criteria in the following list have been defined as a guide line for the storage media
that can be connected to the USB connectors.
• USB memory sticks,
• USB hard disks,
• USB hard disks without partition, with one or with multiple partitions, formatted with
the file systems UDF, FAT, FAT16, VFAT, FAT32, NTFS, EXT2, EXT3 or
ReiserFS
The file system EXT4, BTRFS, UFS, ZFS or exFAT currently will not be supported.
To Next Page
Loading...
Need help?
General
