140
Removing Values from the Programmer
Remove all attributes for a specific fixture from the programmer
To remove all attribute values for a specific fixture (ie. Fixture 1) from the programmer, press the [Off]
key, followed by [Fixture] [1] [Enter].
It is also possible to enter the command for a range of fixtures:
[Off] [Fixture] [1] [Thru] [12] [Enter]
or
[Off] [Fixture] [1] [+] [10] [Thru] [12] [Enter]
You may also use a Fixture Split Widget for visual selection of the Fixture.
To do so, press the [Off] key and select the Pool-Item of the appropriate Fixture.
Remove a complete attribute group for the selected fixtures from the programmer
To remove a complete attribute group for selected fixtures, first select the appropriate fixtures.
After, press the [Off] key followed by the attribute groups soft button from the Programmer side menu,
for example “Color”.
Remove all attribute values for a fixture group from the programmer
To remove all attribute values for group of fixtures, (ie. Group 1) from the programmer, press the [Off]
key, followed by [GROUP] [1] [Enter].
It is also possible to enter the command for a range of groups:
[Off] [Group] [5] [+] [6] [Enter]
You may also use a Group-Split Widget for visual selection of the Fixture. To do that, press the [Off] key
and select the Pool-Item of the appropriate group.
To Next Page
Loading...
