Infinity Chimp 300 - Additonal Options While Recording a Cue; Store a Cue Including Timing; Recording a Cue (with Timings) to the Currently Selected Cuelist; Recording a Cue (with Timings) Using the Master or an Executor Button

172
Infinity Chimp Series
Infinity Chimp Series
Additonal Options while recording a Cue
Store a Cue including timing
You may also use addiditonal command line options to store a Cue including Timing, or to give a Cue a
specific Cue Number by typing.
The Cue Number may also be a point Number such as 1.12. These point Numbers are stored in Decimal
values. For instance, if you record cues:
Cue 1.1 is the same as Cue 1.10 and Cue 1.100. Cue 1.01 will be inserted before Cue 1.10 and Cue 1.11
will be inserted after Cue 1.1.
Timings are optional. Time will be used as a fade time, whereas Time Time will be used as the delay time
of the cue.
Recording a Cue (with Timings) to the currently selected Cuelist
[Record] [Time] [1] [Time][Time] [2] [Enter]
Recording a Cue (with Timings) using the Master or an Executor Button
[Record] [Time] [1] [Time][Time] [2] [Masters Go / Pause Button]
Directly recording to a specific Cuelist and Cue using the Numberblock
[Record] [Time] [1] [Time][Time] [2] [Cuelist] [1] [Cue 4] [Enter]