158
The Preset Split Widget
Once you selected the Presets button in one of the Split Widget Menus, this particular split widget will
change to “Preset” mode.
Fig. 138: Preset Split Widget
Preset Items will also show some extended information once fixtures are selected:
Fig. 139: Preset Pool Item Status Indication
The green or yellow bar in the bottom area of the item indicates if this item may be applied to all of the
fixtures selected (green bar) or only to a part of them (yellow bar).
If a preset is selected for a part of the current selection only, but could be applied to all selected fixtures,
the presets background color will be yellow.
Presets that are displayed with a darker background color may not be applied to the current selection
set at all. However, it might be this preset is already selected for other fixtures in the programmer, which
are not actively selected. If this is the case, the preset will show the count of fixtures it is applied to in the
upper right corner.
To Next Page
Loading...
