258
Safety Instructions for Maintenance
DANGER
Electric shock caused by dangerous voltage inside
Disconnect power supply before servicing or cleaning.
WARNING
Risk of burns due to hot surface
Allow the device to cool down for at least 15 minutes before servicing or cleaning.
Preventive Maintenance
Attention
Before each use, examine the device visually for any defects.
Make sure that:
● All screws used for installing the device or parts of the device are tightly fastened and are not
corroded.
● There are no deformations on housings, fixations and installation points.
● The Display is not cracked or damaged.
● The power cables are not damaged and do not show any material fatigue.
To Next Page
Loading...
