Infinity Chimp 300 - Selecting a Preset Live Without a Fixture Selection; Deselecting (Knocking Out) a Preset; Naming a Preset

163
Infinity Chimp Series
Infinity Chimp Series
Selecting a Preset ‘Live’ without a fixture selection
You may also directly select presets while running a show for all fixtures contained in the preset as soon as
the Split Widget is in “Direct Action” mode.
Direct Action mode may be toggled by clicking on the Direct Action button found in the title bar of the
split widget.
Fig. 143: Direct Action Button
Deselecting (“Knocking Out”) a preset
To deselect a Preset, click on it again or press the [Off] Key followed by the Preset.
Naming a Preset
You may label any item by pressing the [Name] key on the faceplate of the console. The commandline
will read “Name”. Now select the Item you would like to label either from the pool or using the command
line.
The Enter Preset Name On-Screen Keyboard will be shown.