253
Update Software
Before Updating the Chimps OS, make sure you have made backups of all important show and library
files.
Update via USB
In order to update the software on the Chimp, make sure you have downloaded the appropriate
software from the Highlite Infinity website. Copy the downloaded file (with the file extension .swu) into the
folder “infinity\software_update” on your USB Key.
Now, plug the USB Key into one of the Chimps USB Ports and head over to the Setup Menu. Select
Maintenance from the Side Menu.
Click on USB Update from within the Operating System group-box.
Fig. 224: Setup Menu – Maintenance –USB Software Update
The Chimp will present you with a list of available software updates found on your USB Key. Select the
appropriate file and click on Select.
A wizard will lead you through a few steps and will ask you to reboot the console when done.
Do not loose power or switch off the Chimp during the update process. This may render the Chimp un-
bootable!
To Next Page
Loading...
