246
Edit existing Fixture Libraries
To edit an existing fixture library, first select the fixture type in the User or Show library and click on Edit
Fixture found in the menu bar of the Fixture Library Screen.
Please note that the system library is read-only. If you would like to edit a fixture that is contained in the
system library, you first need to transfer it to the user library.
See “Transfering fixtures between libraries” for
more details.
The Library Editor will be shown allowing you to make changes to the fixture type.
Click on Save and Close when done.
If you edit a Fixture in the User Library and are using the same fixture type in your Show, changes
made in the User Library are not automatically carried over to the fixture type within the Show Library.
In order to carry over the changes, replace the fixture type in the Show Library by the appropriate
Fixture Type from the User Library.
To Next Page
Loading...
