Infinity Chimp 300 - Page 204

203
Infinity Chimp Series
Infinity Chimp Series
Button Function
Action on Button Press
Disabled
Select Cuelist
Selects the Cuelist.
Toggle On / Off The first press on the Button will start the Cuelist, the second press will switch it
off.
Go Issues a Go command to start the cuelist, or, if it is already running, advances
through the different cues of the Cuelist.
Pause / Back The first press on the button will pause the cuelist including all ongoing fades.
The second press will advance through the Cuelist in reversed order.
Skip +
Skips to the next cue in the Cuelist without switching it on. If the Cuelist is running
it will skip to the next cue, ignoring all fade times.
Skip -
Skips to the previous cue in the Cuelist without switching it on. If the Cuelist is
running it will skip to the previous cue, ignoring all fade times.
Flash
Will flash the Masters fader value to 100% without Switching the cuelist on or off.
Flash + Go Will flash the Masters fader value to 100% and switch on the Cuelist. The Cuelist
stays “On” after releasing the Button.
Flash + Go + Off Will flash the Masters fader value to 100% and switch on the Cuelist. The Cuelist
will be switched “Off” when releasing the Button.
Flash + Off Will flash the Masters fader value to 100% and switch off the Cuelist when
releasing the Button. It will not start the Cuelist.
Off
Switches off the Cuelist using the Off time to fade out given in the Cuelist
options.
Instant Off
Switches off the Cuelist ignoring the Off time set in the Cuelist options.
Assert
Will bring the Cuelist “Up Front” in the priority stack but does not advance
through the Cuelist.
Tap Sync (Chaser) If this Cuelist is set to “Chaser” Mode and not linked to a Speed Master, this
Button may be used to “Learn” (control) the speed of the Chase.
Fader Function
Action on Button Press
Disabled
Dimmer
The fader acts as a Dimmer Master for the Cuelist Contents. Only Dimmer
channels are effected.
Speed
The fader controls Cuelist (Next, Fade and Snap Timings) and Effect speed of
the contained Cuelist. 100% is equivalent to the speed programmed.
FX-Size
The fader controls Effect Size of effects contained in its Cues.
FX-Speed The fader controls Effect Speed of effects contained in its Cues.
Infade The fader will fade all parameters contained in the cuelist, even channels set to
Snap within the Fixture Library.
X-Fade The fader will crossfade between the current and the next cue allowing for
manual crossfades.