Attach the Tip to the Connecting Body
9-4 CUSA Excel Ultrasonic Surgical Aspirator System User’s Guide
Attach the Tip to the Connecting Body
1. Thread the tip of choice
onto the handpiece
connecting body. Turn
the tip until it is finger
tight.
2. Locate the slot in the tip
torquing base that
matches the color on the
handpiece connector
(23 kHz – green;
36 kHz – blue). Put the
handpiece in the tip
torquing base so that the
metal connecting body
fits snugly in the metal
end of the slot.
3. Hold the handpiece in place in the tip torquing base.
Notice
To avoid product damage, NEVER hold the handpiece in your hand while using
the torque wrench to tighten or loosen the tip.
To Next Page
Loading...
Need help?
General
