IPC IQ/MAX TOUCH - Viewing the Speakers Directory

lines for which you have been given access. For details about speaker directory groups and how to
configure them, see the Features Configuration Guide.
Directory entries in the Speakers directory have the following characteristics:
•
Consist of private lines (internal hoot, MRD, ARD, TV audio), Open Connexion, and dial tone lines
that you can assign to speaker channels.
•
Show a descriptor (button label), resource AOR, microphone icon, and red label indicating the line
type. The line type labels include: MRD (manual ringdown), ARD (automatic ringdown), HOOT, OC
(Open Connexion ), and DT (dial tone).
•
Are sorted by descriptor (button label).
•
A microphone icon indicates talk permission is enabled on the line.
•
For an Open Connexion line, icons indicate listen and talk permission. See Hoot channels and Open
Connexions on page 124 for an illustration.
•
An entry that is grayed out (inactive) indicates a line that has already been assigned to a speaker
channel. The line can be assigned again as needed.
10.6.1.1 View the Speakers directory
View the lines that can be assigned to a speaker channel. The Speakers directory displays only lines to
which you have access.
Prerequisites: Your administrator has configured speaker directory groups and granted you access to the
appropriate lines.
For background information, see Speakers directory on page 150.
1. Tap the Speakers icon in the Navbar.
The Speakers application is displayed. See Speakers on a hard turret on page 128 for an illustration.
2. Tap the Speakers directory icon in the Speakers application header bar.
The Speakers directory is displayed.
10.6: Set up speaker channels 151
IPC Proprietary Unigy 4.3
IQ/MAX TOUCH Turret User Guide