Iris Diagnostics, a Division of Iris International, Inc.
iQ
®
200 Sprint™ (2G)Automated Urine Microscopy Analyzer Service Manual 300-4949 Rev A 01/2005 5-16
5. Service Application Software
“Sending initialization messages”
This status indicates the initialization messages are being sent to the
analyzer control system. This happens once, directly after establishing
the connection.
“Sending initial query messages”
After sending the initialization messages, the Service program sends a
group of initial query messages to read the value of things that don’t
change during machine operation (e.g., calibration table entries, firmware
versions). This happens once, directly after sending the initialization
messages.
“Sending query messages”
Directly after sending the initial query messages and periodically
thereafter, the Service program sends query messages to read the value
of things that might change during machine operation (e.g., sensors). The
periodic polling can be turned off via the Polling menu.
“Idle”
This status is displayed during the brief interval between sending each
periodic set of query messages. The periodic polling can be turned off via
the Polling menu.
Caps Lock Status
Displays the status of the keyboard Caps Lock key. Not particularly
useful, but many programs have this.
Num Lock Status
Displays the status of the keyboard Num Lock key. Not particularly useful,
but many programs have this.
Scroll Lock Status
Displays the status of the keyboard Scroll Lock key. Not particularly
useful, but many programs have this.
To Next Page
Loading...
Need help?
General