IRIS iQ 200 Sprint User Manual

Iris Diagnostics, a Division of Iris International, Inc.
iQ
®
200 Sprint™ (2G) Automated Urine Microscopy Analyzer Service Manual 300-4949 Rev A 01/2005 2-9
2. Installation Procedures
iQ200 Rear Panel SIC Connection Configurations
WARNING: Before making any connections to Load or Unload ports on
the Rear Panel SIC of the iQ200, ensure the jumpers are in the correct
configuration depending on the system options.
AX-4280 Connection to the iQ200
The second port labeled
“Load” should have all
three jumpers removed
from the port. CAUTION! If
the jumpers are not
removed, a fuse will blow
on the backplane of the
card cage (F10) inside the
Microscopy Module.
Load Station Connection to the
iQ200
The second port labeled
“Load” should have all
three jumpers installed in
the port. CAUTION! If the
jumpers are not in place,
the connection will not
work and no power will be
supplied to the Load
Station.
Unload Station Connection to
the iQ200
The third port labeled
“Unload” should have all
three jumpers installed in
the port. CAUTION! If the
jumpers are not in place,
the connection will not
work and no power will be
supplied to the unload
Station. Currently, the only
configuration for this port is
all three jumpers in place.

IRIS iQ 200 Sprint Specifications

General

Brand	IRIS
Model	iQ 200 Sprint
Category	Laboratory Equipment
Language	English