3 Basic Operation of ECDIS 3-58
3.4.3 Shifting the Chart with the Hand Cursor
You can grip the chart and move it freely.
1) Rotate the trackball and move the cursor to the position you want to grip the chart.
2) While keeping left-clicked, rotate the trackball to move the chart. At this time the cursor
changes to the hand cursor
Note:
• If the ship is out of chart view, motion mode change to free automatically.
3.4.4
Shifting the Chart with the [Port List]
If a port is already registered, you can switch to that chart. The registered chart is displayed with the
registered scale.
• To return to the original chart where the ship is there, press the [HOME] .
Note:
• Before using this function, you should register a desired position as a port. See 3.8.1 “Adding to My
Port List”.
(1) Button operation to jump to the port
1) On the display panel
Left-click the [Port List] .
The drop-down list for ports opens.
2) Left-click a port name you want to jump there.
The position registered as the port will be displayed at the center of the screen.
Hand cursor
Registered position as a port
To Next Page
Loading...
