5 Chart Editing
5-26
5.5.1 Selecting Object Types
1) Left-click on a tab for the object type (Symbol, Line, Area, and Text) you wish to select.
2) Select the object you want. See “How to Select Objects” below.
The selected object may be displayed at the bottom part of the object selection panel.
Now you can enter the object you have selected.
How to Select Objects:
You can see the tree structure of the objects on the object
selection panel. For example, to select “Light flare, default”
symbol of the Barrel buoy, perform as follows.
1) Left-click “Buoys” twice quickly
to open the items
behind it.
2) Left-click “Barrel buoy” twice quickly
to open the items
behind it. (Keep continue this operation until “-” mark
disappears.)
3) Left-click “Light flare, default”.
The symbol will appear at the bottom of this panel.
• To close “Buoys”, left-click it twice quickly.
You can also select the item by left-clicking “+” and “-”
mark:
• Left-clicking “+” will open the behind items.
• Left-clicking “-” will close the behind items.
1)
2)
3)
To Next Page
Loading...
