JRC JAN-701B - Changing the Display Color ([DAY;NIGHT])

3 Basic Operation of ECDIS 3-28
3.3.6 Changing the Display Color ([DAY/NIGHT])
You can change the display color to obtain optimum display matched with the lighting conditions on the
bridge. Select one of the following display colors
● DAY1 (Day Bright)
● DAY2 (Day Whiteback) For S-57/C-MAP only
● DAY3 (Day Blackback)
● DUSK (Dusk) For S-57/C-MAP only
● NIGHT (Night)
Key operation:
1) On the operation panel
Press the [DAY/NIGHT] key. Each time you press the key, the display color changes.
The order with which the display color switches over to:
“DAY3”-“DAY2”-“DAY1”-“DUSK”-“NIGHT”-“DUSK”-“DAY1”-“DAY2”-“DAY3”-“DAY2”-...
Note: When leaving for 3 seconds from the operation when operating from the darker one to the
lighter one, next key operation becomes operation from the lighter one to the darker one.
Menu operation:
1) In the normal menu
Select [MENU] - [(7) Main] - [(0) Setting] - [(1)
Color and Brilliance Setting] in that order, and
then select one of items you want.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(6) Main] - [(0) Setting] - [(1)
Color and Brilliance Setting] in that order.
In the User Chart Editing menu
Select [MENU] - [(5) Main] - [(0) Setting] - [(1)
Color and Brilliance Setting] in that order
When you select the level in "Day/Night" list and push [OK] or [Apply] button, the display color of
the screen will be changed.
Day-Night level
“Day Bright”
“Day Whiteback” (S-57/C-MAP)
“Day Blackback”
“Dusk” (S-57/C-MAP)
“Night”