7 Tools and Setting/Serviceman Menu
7-22
7.16 Line Monitor
Communications between the ECDIS and external devices connected to the ECDIS can be checked.
1) After “Serviceman” menu is displayed by “Code Input” panel,
Select [(1) Serviceman] - [(1) Line Monitor] in that order.
The “Line Monitor” panel will be displayed.
2) From the Device Selection field, select a device connected to the ECDIS.
3) Left-click on the [Start] button. Information entered from the selected external device will be
displayed in the entry data display box in real time. Also, information outputted to the selected
external device will be displayed in the output data display box in real time. Left-click on the
[Stop] button to stop information from being updated. Left-click on the [Clear] button to clear
the currently displayed information. If there is no inputting/outputting of data between the
ECDIS and the selected external device, then nothing will be displayed in the data display box.
To Next Page
Loading...
