3 Basic Operation of ECDIS 3-198
3.36 Printing Display
(Only when Connected to a Printer)
By using a printer connected to the workstation, you can print out dialog boxes, such as logbooks, or
panels displayed on the screen.
1) In the normal menu
Select [MENU] - [(7) Main] - [(5) Print ] in that order.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(6) Main] - [(5) Print] in that order.
In the User Chart Editing menu
Select [MENU] - [(5) Main] - [(5) Print] in that order.
The “Print” panel opens.
2) Set for printing and left-click the [OK] on the panel to close the panel.
Printing will starts.
3.37 Saving the Screen
An image of the displayed screen can be saved on the hard disk as a 256-color bit map file.
1) In the normal menu
Select [MENU] - [(7) Main] - [(6) Save Screen] in that order.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(6) Main] - [(6) Save Screen] in that order.
In the User Chart Editing menu
Select [MENU] - [(5) Main] - [(6) Save Screen] in that order.
The image file of the screen will be saved with a file name in the following format:
* When the Lost target, Danger TT Target, Danger AIS Target is in the blink condition, it isn't
captured.
* Radar echo is captured in the contained condition.
Drive_YY
MM DD _ HH MM SS.bmp
(Example) If the file was created at 10:50:15 on 6 June 2008, If the file was created at 10:50:15 on 6
June 2008,it preserves at the E drive. the file name would be“E_080606105015.bmp”
Month
Year
Date
Hour
Minute
Second
To Next Page
Loading...
