JRC JAN-701B - Adjust Radar Bearing, Range and Antenna Height

7 Tools and Setting/Serviceman Menu
7-23
ECDIS
7.17 Adjust Radar Bearing, Range
and Antenna Height
This function adjusts [Bearing], [Range] and [Antenna height].
1) After “Serviceman” menu is displayed by “Code Input” panel,
Select [(1)Serviceman menu]-[(2)Adjust].The “Adjust” panel opens.
2) Input or select a value to each item, or adjust that with .
3) After setting all items, push the [Close] button.
Bearing Adjustment:
The value is input and bearing is
adjusted.
Range Adjustment:
The value is input and range is
adjusted.
Antenna Height:
Selects from the drop-down list
and antenna height is adjusted.