3 Basic Operation of ECDIS 3-80
3.10.8
Displaying Temporary and Preliminary
Notice (ARCS Only)
You can display the temporary and preliminary notice list of the current chart.
1) In the normal menu
Select [MENU] - [(6) Chart] - [(4) ARCS] - [(1) Temporary and Preliminary] in that order.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(5) Chart] - [(4) ARCS] - [(1) Temporary and Preliminary] in that order.
In the User Chart Editing menu
Select [MENU] - [(4) Chart] - [(4) ARCS] - [(1) Temporary and Preliminary] in that order.
The “Temporary and Preliminary” panel opens.
• Depending on the chart used, the items may not be displayed on the panel.
2) Select the item you want to display, and then left-click the [OK].
Then, the “Information” panel of the temporary and preliminary notice list for the current chart is
displayed as shown in the picture.
• “Temporary and Preliminary Notices” can be displayed only when the chart has been
updated.
Note:
• The temporary and preliminary notices are included in the ARCS chart. If the chart used does not
include such notices, they will not be displayed.
To Next Page
Loading...
