7 Tools and Setting/Serviceman Menu
7-26
7.19 TCS Maintenance
This function sets [Reach Offset], [Safety / Limit Check] setting and [Time / Distance to WPT] setting
about the TCS.
1) After “Serviceman” menu is displayed by “Code Input” panel,
Select [(1) Serviceman] - [(5) TCS Maintenance] in that order.
The “TCS Maintenance” panel will be displayed.
2) Input or select setting to each item.
3) After setting all columns, push the [OK] button.
It closes a panel without changing contents when clicking the [Cancel] button.
Safety / Limit Check:
On: Whether [Safety / Limit Check] of the route
is completed when starting to auto sail is
checked.
Off: Whether [Safety / Limit Check] of the route
is completed when starting to auto sail is
not checked.
Time / Distance to WPT
From center point of WOL:
The distance / time from own ship to WPT is calculated between own ship and center
point of WOL.
From cross point of WOL and heading:
The distance / time from own ship to WPT is calculated between center point of heading
of own ship and WOL.
Reach Offset:
Input a reach offset of TCS.
To Next Page
Loading...
