JRC JAN-701B - 9.1 Alarm Function

9
Reference
9-2
9.1 Alarm Function
(1) No Alarm
Category*1 Message*2 Alarm Type*3
Alarm
Colour*3
Buzzer Type*4 Meaning*5 Condition*6
No Alarm No Alarm Normal State Green Silent No Alarm
(2) System Alarm
Category*1 Message*2 Alarm Type*3
Alarm
Colour*3
Buzzer Type*4 Meaning*5 Condition*6
POSN 1(Data) Alarm Red System Alarm POSN1 (primary) is defective or
communication line is cut.
POSN1 not fix Alarm Red System Alarm POSN1 is not fixed.
No.1
Position
Data Alarm
POSN1(NON-WGS84) Alarm Red System Alarm Geodetic system between chart and
measured position information being
received differs.
Position measuring
instrument is
connected
(including DR).
POSN 2(Data) Alarm Red System Alarm POSN2 (secondary) is defective or
communication line is cut.
POSN2 not fix Alarm Red System Alarm POSN2 is not fixed.
No.2
Position
Data Alarm
POSN2(NON-WGS84) Alarm Red System Alarm Geodetic system between chart and
measured position information being
received differs.
Position measuring
instrument is
connected
(including DR).
No.1
Position Shift
Alarm
POSN1 shifted Alarm Red System Alarm The shift amount of the primary
position exceeds the limit being set.
User setting
Position
Difference
Alarm
Position difference
exceed
Alarm Red System Alarm The difference between the primary
and second positions exceeds the
limit being set.
User setting.
Position measuring
instrument is
connected to
POSN2
(including DR).
PROC(AZI) Alarm Red System Alarm Rotation signal (BP) is out of
specifications.
PROC(HL) Alarm Red System Alarm Rotation signal (BZ) is out of
specifications.
PROC(Trigger) Alarm Red System Alarm Trigger signal is out of specifications
or signal line is cut.
PROC(Video) Alarm Red System Alarm Video signal is out of specifications.
RIB(Data) Alarm Red System Alarm Error occurred in the radar interface
board.
PROC(Reverse) Alarm Red System Alarm Error by reverse-rotation in the signal
processing part.
PROC(INT) Alarm Red System Alarm Error in interrupting of stun in the
signal processing part.
Radar Data
Alarm
ASIC1 to Radar Alarm Red System Alarm Error in
interrupting from ASIC1 to
radar DSP
During radar
display
Target Track
Data Alarm
TT(Data) Alarm Red System Alarm Target Track is defective or signal
line is cut.
During TT
display
SRB Data
Alarm
SRB(Data) Alarm Red System Alarm Error occurred in the serial relay
board
Always
Gyro I/F(Gyro) Alarm Red System Alarm Gyro is defective. GYRO Data
Alarm
Heading(Data) Alarm Red System Alarm Error occurred in the heading data of
gyro interface or its line is cut.
Gyro is
connected.
Gyro I/F(Log) Alarm Red System Alarm Log is defective. LOG Data
Alarm
Log(Data) Alarm Red System Alarm Error occurred in the log data of log
interface or its line is cut.
Log is
connected.
Autopilot
Data Alarm
Autopilot(DATA) Alarm Red System Alarm Autopilot is defective or
communication line is cut.
Autopilot is
connected.
Fan(CPU) Alarm Red System Alarm CPU fan is defective.
CPU High Temperature Alarm Red System Alarm CPU temperature is rising.
Fan(Main PWR) Alarm Red System Alarm Main power supply fan is defective.
Fan(ATX PWR) Alarm Red System Alarm ATX power supply fan is defective.
Fan(LCD) Alarm Red System Alarm LCD fan is defective.
Disk1 Error Alarm Red System Alarm Disk1 is defective.
Disk2 Error Alarm Red System Alarm Disk2 is defective.
Hardware
Alarm
AC offline Alarm Red System Alarm AC power is offline.
Always